Cables for CAN and LIN

The CANcable 2Y is a Y cable for Vector CAN/LIN interfaces with D‑SUB9 double assignment, such as the VN1600 interface family or VN8970.
It splits the double assignment into two separate D‑SUB9 connectors for CH A and CH B.

• Length: 0.3 m
• Connectors: 1x female D-SUB9 connector, 2x male D-SUB9 connectors

The CANcable0 is a CAN/LIN connection cable without terminating resistors.
When used with devices featuring primary and secondary D‑SUB9 pin assignment, only the primary channel is available.

• Connectors: 2x female D-SUB9 connectors
• Properties: Without terminating resistors

The CANcable1 is a CAN connection cable with two parallel 120‑Ω terminating resistors.
When used with devices featuring primary and secondary D‑SUB9 pin assignment, only the primary channel is available.

• Properties: Two parallel 120 Ohm terminating resistors

The CANcableY is a Y extension cable for CAN or LIN applications.

Y extension cable for CAN or LIN.

• Length: 2 m (overall length)
• Connectors: 3x female D-SUB9 connectors
• Properties: Including gender changer
• Only available with CANcable Set Pro

The CANterm120 is a termination adapter for high‑speed CAN buses with a 120‑Ω terminating resistor.
When used with devices featuring primary and secondary D‑SUB9 pin assignment, only the primary channel is available. 

• Connectors: 1x female D-SUB9 connector, 1x male D-SUB9 connector
• Properties: One 120 Ω terminating resistor

The CANcableTnT Term is a connection cable for Truck & Trailer applications (ISO 11992).
It is intended exclusively for use with CANpiggy 10011opto and then provides bus termination according to ISO 11992.

• Properties: With termination acc. ISO 11992 when used with CANpiggy 10011opto

The CANcableTnT Term is a connection cable for Truck & Trailer applications (ISO 11992).
It is intended exclusively for use with CANpiggy 10011opto and then provides bus termination according to ISO 11992.

• Properties: With termination acc. ISO 11992 when used with CANpiggy 10011opto

The CANcableA is a CAN/LIN connection cable with open wire ends for flexible wiring.

• Length: 0.5 m
• Connectors: 1x female D-SUB9 connector, 4x stripped wires

The VNcable 3Y is a Y cable for Vector FlexRay/CAN/LIN interfaces with D‑SUB15HD triple assignment.
It splits one D‑SUB15HD connector into three D‑SUB9 connectors for CH A, CH B and CH C.

• Connectors: 1x female D-SUB15HD connector, 3x male D-SUB9 connectors

The VNcable DSUB62 is a connection cable with D‑SUB62 connectors for the D62Y9 breakout box and the VN7570 and VN7572 interfaces.

• Length: 0.5 m (cable only), 0.6 m (overall length)
• Connectors: 1x D-SUB62 (male), 1x D-SUB62 (female)

• Length: 1.2 m (cable only), 1.3 m (overall length)

The VNcable DSUB62 B is a connection cable with a D‑SUB62 connector and open wire end.

• Connectors: 1x D-SUB62 (female), 62x wires

The VNcable D62Y9 is an adapter cable for VN7570 and VN7572.

• Length: approx. 0.5 m (overall length), approx. 0.4 m without connectors
• Connectors: 1x D-SUB62 (female), 1x D-SUB15 (female), 8x D-SUB9 (male)

The FR/CANcable 2Y is a Y cable with D‑SUB9 double assignment specifically for the VN7610 FR/CAN interface.
It splits the double assignment into two separate D‑SUB9 connectors with single assignment.

• Length: 0,3 m
• Connectors: 1x D-SUB9 (female), 2x D-SUB9 (male)