Cables for Time Synchronization & Power Supply

Contact Us

Time synchronization and power supply accessories enable the synchronized operation of multiple Vector devices and provide reliable external power.

The following overview supports selecting suitable cables, distributors and power supply units for the specific device and application scenario.

SYNCcables

SYNCcables are connection cables for time synchronization of Vector devices and are available in several variants.
They differ in length and connectors and support both pure synchronization and combined synchronization and power‑supply use cases.

SYNCcableXL.png
SYNCcable XL

Time‑synchronization cable with 2× female 3‑pin Binder connectors (type 711), length 2 m

SYNCcable50.png

Time‑synchronization cable with 2× female 3‑pin Binder connectors (type 711), length 0.5 m

PowerCable_Binder2_Banana2_EN.jpg

Multi SYNCboxes

Multi SYNCboxes are synchronization distributors for time‑coupling multiple Vector devices.
They are available in active and passive versions for different installation scenarios.

Active synchronization distributor with 12× male 3‑pin Binder connectors (type 711) for five or more devices

MultiSYNCboxExternal.png

Distributor in plastic housing with 5× male 3‑pin Binder connectors (type 711) for up to five devices

MultiSYNCboxInternal.png

Synchronization distributor mounted on a PC slot bracket for up to five devices

Power Supply Units

TypeU/IConnector
12 V/1.5 A12 V/1.5 A3-pin Binder (female, type 711)
ODU MINI-SNAP24 V/2.5 AODU S11L0C-P02NPL0-5200

The power supply units have cables of 2 m length. International adapters are available on request.

PowerCable_12V_1.5A.jpg

Plug‑in power supply with interchangeable country adapters and 3‑pin Binder connector (type 711)

  • Length: 2 m
  • Connectors: 1 x adapter for USA, 1 x adapter for Europe, 1 x 3-pin Binder connector (type 711)
VectorPowerSupply_ODU_Mini_Snap_Single.png

Plug‑in power supply with 24 V and 2.5 A, available with different country adapters

  • Connectors: 1x adapter for Europe, 1 x ODU S11L0C-P02NPL0-5200
  • Power cords as separate articles: Europe, China, India, UK, US

Bord Net Power Supply

Board net power supply cables enable powering Vector devices directly from the vehicle power system.

Binder_12V_Plug.png

On-board supply cable with 3‑pin Binder connector (type 711) and 12‑V vehicle plug (DIN ISO 4165).

On-board supply cable.

ODU_12V_Plug.png

Adapter cable with ODU connector for the VN8900 Interface family and 12‑V vehicle plug

  • Connectors: 1 x ODU S11L0C-P02NPL0-5200, 1 x 12 V plug (DIN ISO 4165)

Power Supply Cable

Power supply cables are used to supply power to Vector devices and are available with different connector types.

Binder_3Pin_Plug.png

Connection cable with Binder connector and stripped wire ends, length 1.5 m

  • Connectors: 1 x female 3-pin Binder connector (type 711), 3 x stripped wires
Binder_Banana_Plug.jpg

Power cable for Vector devices.

  • Connectors: 1x female 3-pin Binder connector (type 711), 2x banana plugs (4 mm)
ODU_Bunch.png

Power cord for Vector devices with ODU MINI-SNAP connector, length approx. 2 m

  • Connectors: 1 x ODU connector (type S11L0C-P02NPL0-6200), 2 x banana plugs (power supply)
  • Temperature range: 
    • In mobile state: -30 °C … +70 °C
    • In stationary state: -40 °C … +85 °C
OBDPower.png

The Power Adapter OBDII is an OBD‑II/ODU power supply cable for the VN8810 interface.
Its use requires an OBDcable VN88 or OBDcable VN88A.

  • Length: approx. 30 cm (overall length)
  • Connectors: 1 x 16-pin OBD-II connector (female), Type B (24 V), 1 x 2-pin ODU connector (male)

Product Descriptions

Related Products

Let's Discuss Your Use Case
Let's Discuss Your Use Case
Whether you’re exploring options or already planning your next steps, share your requirements with us. We support you in finding the right solution.