Vector provides a wide range of cables, adapters and additional accessories for the VX1000 Measurement and Calibration Interface Hardware.
This overview supports the selection of suitable accessory components for different measurement and calibration setups.
Base Modules | Power Supply
VX1060
Vector Power Supply 12V/1.5 A
- Input Voltage 110 - 240 VAC
Cable Banana Plug <> Binder 3-pin
- Length: 1.5 m
Power Sync Cable
- Length: 1.5 m
VX1134/VX1135
Vector Power Supply ODU Mini-Snap
- Output: 24 V and 2.5 A
- Region-specific power cord
- Input Voltage 110 - 240 VAC
Cable Banana Plug <> ODU Mini-Sna
- Length: 2 m
Cable Vehicle input <> ODU Mini-Snap
VX1161
Power Supply 24V 9.2A Molex Mini-Fit
- Region-specific power cord
- Input Voltage 110 - 240 VAC
Power Cable Molex Minifit
- Power cord 4mm² with open ends – 1.5 m long
- Always included in VX1161 delivery
Base Modules | Cables
Serial
VX1345A Extension
- IP60, only JTAG, SWD, DAP ≤ 120 Mhz
- Length: 5 m
VX1346A Extension
- IP60, only JTAG, SWD, DAP ≤ 120 Mhz
- Length: 8 m
Serial2
VX1311A Extension
- IP67
- Length: 2 m
VX1311B Extension
- IP67
- Length: 5 m
VX1311C Extension
- IP67
- Length: 8 m
HSSL
VX1372 Cable
- IP67
- Length: 2 m
VX1375 Cable
- IP67
- Length: 5 m
VX1376A Cable
- IP67
- 45° degree connector on one side
- Length: 5 m
HSSL2
VX1381A Cable
- IP67
- Length: 2 m
VX1381B Cable
- IP67
- Length: 5 m
VX1381C Cable
- IP67
- Length: 8 m
Base Modules | Mounting Accessories
VX1060
Fix Kit 32mm Device
- Set contains 4 pcs. of wall brackets
VX1134 / VX1135
Fix Kit Large Device
- Set contains 4 pcs. of wall brackets
VX1161
Mounting Kit for installation into a 19“ rack
- Includes 2 mounting brackets as well as all mounting material
Mounting Kit vertical for VX1161
Includes 4 mounting brackets
PODs | Enclosures
Serial PODs
Enclosure Gen2
- IP67-rated enclosure for mounting a Serial PODs to an ECU
HSSL PODs
Evalboard Extension Kit
- Metal case for HSSL PODs for desk and laboratory use cases
PODs | Pigtails
Serial
VX1348B
- 2.5 m Pigtail for Serial PODs
- IP60
VX1349B.01
- 0.7 m Pigtail for Serial PODs
- IP60
Serial2
VX1311G
- 0.7 m Pigtail for Serial PODs
- IP67
VX1311H
- 2.5 m Pigtail for Serial PODs
- IP67
HSSL
VX1379B
- 0.5 m Pigtail for HSSL PODs
- Max Datarate around 5 Gbps
- Non-waterproof, but moveable cable gland
VX1379C
0.5 m Pigtail for HSSL PODs
Max Datarate around 5 Gbps
Waterproof, but non-moveable cable gland
HSSL2
VX1381E
- 0.6 m Pigtail for HSSL PODs
- Max Datarate around 20 Gbps
PODs | Target Interface Adapters
Target Interface Ribbon Cable
Ribbon Cable
- Adapter connector on ECU side depending on selected interface variant
- Up to 80 MHz Interface Frequency
- Used for: DAP, SWD, JTAG
- 10- / 16- Pin 1.27mm
Further Accessories
Protective cap for VX1311/VX134x Serial Pigtail
- Protection up to IP68
Protective cap for VX1381 HSSL Pigtails
Protection up to IP68 (1 m @ 120 min)
Product Descriptions
Related Products
Measurement and Calibration Team
How Can We Help You? Let's Talk!
Whether you’re exploring options or already planning your next steps, share your requirements with us. We support you in finding the right solution.